Users need to choose a more suitable type of booster pump according to the water pressure of their own home. Usually, it is more suitable to choose a small one at home, which can overcome the system resistance and increase the circulation power.
Water pressure is one aspect, but also need to pay attention to the situation of water flow. For families with large water flow, the pressure of the pump is relatively small, so it needs to be boosted. From these two points, you can often buy a better water pump.
For the installation of the gas wall-hung boiler water pump, it is usually best to choose behind the household electric meter. However, it is also installed in front of the water inlet of the gas wall-hung boiler. In the place of the hot water outlet, pay attention to the kind that requires a relatively high temperature resistance of the water pump.
The position of the water pump is determined. When installing, it is necessary to remove the short pipe connecting the cold water valve and the water heater inlet. Metal hoses or aluminum plastic pipes can be used to directly connect the water pump to the cold water inlet pipeline of the water heater. You also need to install a water pressure switch, but if it is an automatic booster pump, you do not need to install this external water pressure switch. The installation of the water pump needs to be carried out by professional personnel according to the requirements in the manual, and it must be determined that the power supply can be used and cannot be mismatched. The hot water pump needs to be installed with the liquid flowing upwards.
When the gas wall-hung boiler is in use, the water pressure is unstable, which will affect the normal use, but after the water pump is installed, the situation will be different, it can have the effect of supercharging, and it can also make the water flow more smoothly.